product-img
product-img
  • small-img
  • small-img

S8610

L3 Managed S86 Series Switch with 10-Slot

> High port density 10G line cards
> Fully compliant with 40GE Ethernet standards
> Support virtualization technologies
> Hardware level encryption technology MACsec
> High-performance IPv4/IPv6 service capabilities
> Comprehensive security control policies
> Support hot swapping for all components
> Advanced CLOS multistage and multi-plane switching architecture, delivering great bandwidth scalability


  • 仕様
  • アクセサリ
  • ダウンロード
  • Hardware Feature

    Total Number of Slots

    13

    Number of Line Card Slots

    10

    Number of MPU Slots

    2

    Switching fabric module Slots

    1

    Hot Swapping

    Yes

    Console Port

    1 × RJ45 console port
    1 × Micro-USB port

    Power Supply

    Not included

    Min: 3
    Max: 6

    100-240V AC 50-60 Hz (Internal)

    Power Consumption

    Idling: 30W
    Full load: 2430W

    Operating Temperature

    0°C to 45°C (32°F to 113°F)

    Operating Humidity

    5%RH–95%RH

    Storage Temperature

    –40°C to 70°C (–40°F to 158°F)

    Redundancy

    Redundant MPUs, power modules, and fan trays

    Performance

    Layer

    Layer 3

    Managed

    Yes

    Switching Capacity

    256 Tbps

    Packet Forwarding Rate

    8400 Mpps

    Jumbo Frame

    10000 Byte

    Features

    Ethernet

    IEEE 802.1P(CoS priority)
    IEEE 802.1Q
    IEEE 802.1ad (QinQ), selective QinQ and Vlan mapping
    DLDP
    LLDP
    Static MAC configuration
    Limited MAC learning
    Port mirroring and traffic mirroring
    Port aggregation, port isolation, and port mirroring
    IEEE 802.1D (STP)/802.1w (RSTP)/802.1s (MSTP)
    IEEE 802.3ad (dynamic link aggregation), static port aggregation, and multi-chassis link aggregation
    RRPP (Rapid Ring Protection Protocol)
    Jumbo frame
    SuperVLAN
    PVLAN
    Multicast VLAN+
    MCE

    Routing

    Static routing, RIP, OSPF, IS-IS, and BGP4
    IPv4/IPv6 ECMP
    VRRP
    IPv4/IPv6 Policy-based routing
    IPv4/IPv6 Routing policy
    IPv6 static routing, RIPng, OSPFv3, IS-ISv6, and BGP4+
    VRRPv3
    Pingv6, Tenetv6, FTPv6, TFTPv6, DNSv6, and ICMPv6

    DHCP

    DHCP Client
    DHCP Snooping
    DHCP Snooping option82
    DHCP Relay
    DHCP Server
    DHCP auto-config

    IP routing

    12K IPV4 routing entries
    Static routing
    RIPv1/v2 and RIPng
    OSPFv1/v2/v3
    BGP and BGP4+ for IPv6
    IS-IS
    VRRP/VRRPv3

    Mirroring

    Flow mirroring
    N:4 port mirroring
    Local port mirroring and remote port mirroring

    Multicast

    PIM-DM, PIM-SM, PIM-SSM, MSDP, MBGP, and Any-RP
    IGMP V1/V2/V3 and IGMP V1/V2/V3 snooping
    PIM6-DM, PIM6-SM, and PIM6-SSM
    MLD V1/V2 and MLD V1/V2 snooping
    Multicast policies and Multicast QoS

    IRF

    IRF2
    Distributed device management, distributed link aggregation, and distributed resilient routing
    Stacking through standard Ethernet interfaces
    Local device stacking and remote device stacking

    Security

    Hierarchical user management and password protection
    AAA authentication support
    RADIUS authentication
    HWTACACS
    SSH2.0
    Port isolation
    802.1X authentication, centralized MAC authentication
    Port security
    IP Source Guard
    HTTPs Hierarchical user management and password protection
    802.1X authentication and centralized MAC address authentication
    Guest VLAN
    Portal authentication
    DHCP snooping
    Dynamic ARP detection
    BPDU guard and root guard
    uRPF
    IP/Port/MAC binding
    Plaintext authentication and MD5 authentication for OSPF and RIPv2 packets
    Public Key Infrastructure (PKI)

    ACL/QoS

    Standard and extended ACLs
    Ingress and egress ACLs
    VLAN ACLs
    Global ACLs
    Diff-Serv QoS
    SP, WRR, SP+WRR, CBWFQ
    Traffic shaping
    Congestion avoidance
    Priority marking and remarking
    802.1p, TOS, DSCP, and EXP priority mapping

    System Management

    Loading and upgrading through XModem/FTP/TFTP
    SNMP v1/v2/v3
    sFlow
    RMON
    NTP clocks
    Fault alarm and automatic fault recovery
    System logs
    Device status monitoring mechanism, including the CPU engine, backplane, chips and other key components

    Network Management

    Command line interface (CLI) configuration
    Telnet remote configuration
    Configuration via console port
    SNMP v1/v2/v3
    System log
    Power, fan, temperature alarm

    HA

    1+1 redundancy for key components such as MPUs
    1+1 redundancy for power modules
    Passive backplane
    Hot swapping for all components
    Real-time data backup on active/standby MPUs
    CPU protection
    VRRP
    Hot patching
    Ethernet OAM (802.1ag and 802.3ah)
    RRPP/ERPS
    VCT
    Smart-Link
    ISSU

    General

    Thunderproof

    Common mode: 2kV
    Differential mode: 1kV

    Fully loaded weight

    64.5 kg (142.20 lb)

    Gross Weight

    90.5 kg (199.52 lb)

    Product Dimensions

    620 mm × 440 mm × 660 mm (24.41" × 17.32" × 25.98" )

    Packaging Dimensions

    870 mm × 790 mm × 870 mm (34.25" × 31.10" × 14.57")