ISC-EAA2-C118-P
Network EAS AM Antenna
> Superior detection distance, max detection distance can be 2.4 meters (pencil tag DHI-ISC-ETA5-T901).
> Excellent anti-interference, continuous working in complex electro magnetic environment.
> EBuild-in 1.3 inch OLED display with convenient configuration.
> Auto/manual adjust phase to effectively handle different kinds of interference.
> Alarm volume and alarm tone are both adjustable.
> The primary and replica antenna are all integrated transceivers, three modes can be selected: RX, TX, TR mode.
> The primary antenna can connect up to 2 replica antennas as 1 set system. Multi-system can work together.
> Stylish and minimalist appearance, beautiful and elegant, high strength plastic shell, solid and easy to install.
> Economic operating power consumption, energy-saving and environment-friendly.
> Support firmware upgrade.
> CCTV monitoring linkage.
> Supports multi-language (Optional).
> Supports DSS Pro platforms.
> Support WEB interface.
> Support cloud services, remote configuration.
Performance
Model
DHI-ISC-EAA2-C101-P
DHI-ISC-EAA2-C111-P
DHI-ISC-EAA2-C108-P
DHI-ISC-EAA2-C118-P
DHI-ISC-EAA2-C001-R
Technology
Acousto-Magnetic Antenna
Detection Frequency Band
58 kHz
Detection Distance of EAS Labels
1.8 – 2.0 m (5.91 ft – 6.56 ft) (Distance of two antennas) * depending on environment
Detection Distance of EAS Tags
2.0 – 2.4 m (6.56 ft – 7.87 ft) (Distance of two antennas) * depending on environment
Alarm Volume
Max 90 dB (Adjustable)
Antenna Type
Primary antenna
Primary antenna
Primary antenna
Primary antenna
Replica antenna
Adaptability
A Single primary antenna can connect to two replica antennas simultaneously
Sound and Light Alarm
Primary and Replica Antenna
Certifications
Certifications
IEC 60068-2-1
IEC 60068-2-2
CE-LVD: Low Voltage Directive 2014/35/EU
CE-EMC: Electromagnetic Compatibility Directive 2014/30/EU
CE-RED: Radio Equipment Directive 2014/53/EU
FCC: 47 CFR FCC Part 15, Subpart BRoHS
Conform with RoHS
Directive 2011/65/EU, 2015/863/EU and REACH regulations as
defined in EC No 1907/2006 and subsequent amendments.Safety
ICNIRP 2010 Guidelines
ICNIRP 1998 Guidelines
EC directive 2013/35/EU
EC recommendation 1999/519/EC
IEEE C95.1:2005
EN IEC 62311:2020
EN 50364:2010
EN 62369-1:2010Ports
TR Board Port (CH1, CH2, CH3)
CH1 integrates into the main board, CH2 and CH3 can connect to the TR board as needed
NA
CCTV Port
Output port for the linkage signal of the camera, up to 3 cameras can be connected simultaneously.
NA
Sensitivity Adjustment DIP Switch
16-level adjustable signal sensitivity
Network Interface
RJ45
NA
Network Communication Protocol
HTTP, TCP/IP
NA
Open Protocols
SDK
NA
Supporting Software
DSS Pro, Configtool
DSS Pro, Configtool
DSS Pro, Configtool, WISS
DSS Pro, Configtool, WISS
NA
Regular Parameters
Shell Material
ABS
Shell Color
White
Input Voltage
220 – 240 VAC @ 50 Hz / 60 Hz
100-130 VAC @ 50 Hz / 60 Hz
220 – 240 VAC @ 50 Hz / 60 Hz
100-130 VAC @ 50 Hz / 60 Hz
24 VAC @ 50 Hz / 60 Hz
Output Voltage
24 VAC / 3 A
24 VAC / 3 A
24 VAC / 3 A
24 VAC / 3 A
NA
Maximum Power Consumption
25 W
25 W
25 W
25 W
23 W
Typical Power Consumption
20 W
20 W
20 W
20 W
18 W
Overall Exterior Size
1500 mm × 400 mm × 120 mm (59.06'' × 15.75'' × 4.72'')
Packing Size of Primary / Replica Antenna
1590 mm × 490 mm × 200 mm (62.60'' × 19.30'' × 7.87'')
Gross Weight
8.50 kg (18.74 lb)
8.50 kg (18.74 lb)
8.50 kg (18.74 lb)
8.50 kg (18.74 lb)
7 kg (15.43 lb)
Operating Temperature
0 °C to 45 °C ( 32 °F to 113 °F)
Operating Humidity
0 % – 95 % (RH)
Installation
Vertical pole mount
