Performance

LCD

LCD screen: Supports displaying time, phase direction, phase number, phase countdown, phase total time; searching for fault and software information; configuring cycle scheme, control mode, time and date, and network

Flasher

Standard hardware flasher, independent on program control (only for models with flasher)

Channel

3 output boards, supporting 36 channels

Phase

16 parent phases and 16 overlap phases. Supports repeat running of parent phase, meeting requirements of repeat timing in a cycle and independent parameter settings

Signal Group

12 groups

Cycle Scheme

Up to 54 cycle schemes

Pretimed Control

Up to 112 daily schemes, 48 pretimed periods, 30 weekly schemes, 30 daily dispatch schemes, and 30 special dispatch schemes

Pedestrian Crossing

Input and output of up to 8 pedestrian pushbuttons

Signal Control Mode

Manual control, pretimed control, cableless link control, actuated control, pedestrian crossing coordination control

Actuated Control

Up to 16-channel coils and 64-channel traffic enforcement cameras. Two detecting devices (include camera, coil, and more) can be used for detecting one lane

Manual Control

Manual control and remote control through host computer or central platform to meet on-site requirements

Change of Control Modes

Natural change between manual control and automatic control (pretimed control, actuated control, and more)

Cableless Linking Control

Yes. Coordination control is realized by GPS time synchronization and setting offset

Special Mode Control

Yes

Two-intersection Control

Yes

Temporary Scheme

Supports configuring or clearing temporary schemes through platform

Waiting Area Configuration

Yes

Default Light Color

Default light colors include all red, flashing yellow, light off, and red flashing. Default light color displays when no phase is running in a scheme or no channel is configured

Special Status

Supports special status control of traffic lights, such as all red, yellow flashing, light off, and red flashing

Countdown Timer

Self-learning, pulse, and RS-485 communication countdown timers. Supports setting baud rate when using RS-485 communication countdown timer

Time Synchronization

NTP, GPS, network sync, manual time adjustment

Hot Standby of Main Control Board

Yes

Phase Parameters

Separately set parameters of phase for cycle schemes and repeated phase. Each cycle scheme can be set with different phase parameters

Signal Control Duration

Adjustable

Auto Phase Timing

When adjusting a cycle, set the total cycle length, and the phases will be timed automatically according to the split (the ratio of phase time and cycle length in a cycle)

Failure Detection

Degradation mechanism in case of green conflict and light fault; independent hardware yellow flashing control; fault information upload and search

Door Monitoring

Monitors door of the controller, and report door status (opened or closed) to platform

Network Control

Communicates with host computer or central platform through network; supports setting temporary scheme and special tasks on platform

Information Security

Identity authentication, control order verification, update verification of operation parameters, and broadcast storm protection

Parameter Setting

Supports setting control parameters on PC client and remote server

Upgrade

Network upgrade, USB/TF card upgrade

Lighting

Gives out light when door of the signal controller is opened or closed

Voltage Monitoring

Monitors input voltage

Temperature and Humidity Monitoring

Yes

Low Voltage Downgrade

Reports temperature and humidity to platform

Startup Sequence

Yes

Port

Control Switch

1 main power switch, 1 controller switch, 1 signal light control switch, 1 flasher switch (only for models with flasher), 1 socket switch, 1 three-pin socket, and 1 lighting switch

Power Input

1

Network

3 RJ45 10/100M Ethernet ports: 1 on the main control board, and 2 on the communications control board

RS-232

8

RS-485

4

USB

2

TF Card

2

GPS

2

Alarm Input

14 (pedestrian pushbutton input port included)

Alarm Output

10 (pedestrian pushbutton output port included)

General

Power Supply

220V AC±30%/110V AC±20%, 50 Hz±2 Hz

Insulation Resistance

≥10MΩ

Voltage Resistance

1500V AC, 50Hz (1500V AC, 50Hz voltage is applied between the power electrode or other conductive circuits connected to the power electrode and easily accessible parts such as cabinets and installation casing)

Overall Power Consumption

≤60W (no load)

Drive Power

≤550W

Operating Temperature

–40°C to +80°C (–40°F to +176°F)

Operating Humidity

10%–95% (no condensation)

Protection Grade

IP54

Protection

Mains lightning protection; network lightning protection; electromagnetic immunity (no electrical failure in electromagnetic disturbance environments such as electrostatic discharge, fast electrical transient bursts, surges, and short-term voltage interruptions); waterproof (passed rain test. The signal controller works normally during and after the test, and there is no water seepage or accumulation inside the signal controller); dustproof (during and after the dust test, the signal controller works normally, and there is no large amount of dust inside the signal controller); corrosion (the signal controller works normally after the salt spraying test, and there is no serious corrosion of metal components such as the signal controller casing and internal rack); passed vibration test and steel ball impact test

Dimensions

Without antenna cover: 450.0 mm × 300.0 mm × 780.0 mm (17.73'' × 11.82'' × 30.71'') (L × W × H)
With antenna cover: 450.0 mm × 300.0 mm × 789.9 mm (17.73'' × 11.82'' × 31.48'') (L × W × H)

Net Weight

50.0 kg (110.23 lb)

Gross Weight

65.0 kg (143.30 lb)

Certification

NTCIP compliance

Installation

Floor-standing