What is Dahua Plug & Play Technology ?
In the past, complex wiring and difficult configuration leads to low installation efficiency. Learning how to connect devices with such condition takes too much time and increases labor cost. Furthermore, messy cables also look unpleasant and annoying. To address this issue, Dahua integrated Plug & Play with PoC, PoE and other technologies designed to enable the front and back end of the equipment, making the installation more simple and convenient.
HDCVI System PoC Technology
For analog system, HDCVI has always been known for its Plug & Play feature. It only needs one coaxial cable to connect both the camera and XVR devices and display videos of the monitored scene. Users do not need to manually configure the network settings. The XVR can automatically recognize the camera‘s signal format for adaptive switching and displaying of video footages.
To further simplify the installation of HDCVI surveillance system, we released the HDCVI PoC (Power over Coax) system.
Key Point：
• Both video, audio, control signal and electrical power can be transmitted over one single coaxial cable.
• Eliminates the need for separate camera power supplies and no additional wiring is required, enabling Plug & Play feature in the entire system.
IP Plug & Play Technology Based on PoE System
Power over Ethernet (PoE) is a standard that allows Ethernet cables to transmit data and power simultaneously using a single network cable. This enables system integrators and network installers to deploy powered devices in locations that lack electrical circuitry. In addition, PoE eliminates the expense of installing additional electrical wiring.
Key Points:
• PoE NVR simplifies the system and saves electrical wiring and installation costs.
• PoE NVR can initialize and add camera automatically, greatly savinginitialization time.
• PoE NVR can add third-party camera automatically.
IP Plug & Play Technology Based on the Same LAN System
Plug & Play key point:
• When Plug and Play is enabled, the device automatically adds cameras on the same LAN.
• For uninitialized cameras, the device automatically initializes them before adding them.
• When the camera and NVR IP address are in different network segment, the NVR can modify the camera’s IP address to the NVR’s network segment.
HDCVI System PoC Technology
For analog system, HDCVI has always been known for its Plug & Play feature. It only needs one coaxial cable to connect both the camera and XVR devices and display videos of the monitored scene. Users do not need to manually configure the network settings. The XVR can automatically recognize the camera‘s signal format for adaptive switching and displaying of video footages.
To further simplify the installation of HDCVI surveillance system, we released the HDCVI PoC (Power over Coax) system.
Key Point：
• Both video, audio, control signal and electrical power can be transmitted over one single coaxial cable.
• Eliminates the need for separate camera power supplies and no additional wiring is required, enabling Plug & Play feature in the entire system.
IP Plug & Play Technology Based on PoE System
Power over Ethernet (PoE) is a standard that allows Ethernet cables to transmit data and power simultaneously using a single network cable. This enables system integrators and network installers to deploy powered devices in locations that lack electrical circuitry. In addition, PoE eliminates the expense of installing additional electrical wiring.
Key Points:
• PoE NVR simplifies the system and saves electrical wiring and installation costs.
• PoE NVR can initialize and add camera automatically, greatly savinginitialization time.
• PoE NVR can add third-party camera automatically.
IP Plug & Play Technology Based on the Same LAN System
Plug & Play key point:
• When Plug and Play is enabled, the device automatically adds cameras on the same LAN.
• For uninitialized cameras, the device automatically initializes them before adding them.
• When the camera and NVR IP address are in different network segment, the NVR can modify the camera’s IP address to the NVR’s network segment.
HDCVI System PoC Technology
For analog system, HDCVI has always been known for its Plug & Play feature. It only needs one coaxial cable to connect both the camera and XVR devices and display videos of the monitored scene. Users do not need to manually configure the network settings. The XVR can automatically recognize the camera‘s signal format for adaptive switching and displaying of video footages.
To further simplify the installation of HDCVI surveillance system, we released the HDCVI PoC (Power over Coax) system.
Key Point：
• Both video, audio, control signal and electrical power can be transmitted over one single coaxial cable.
• Eliminates the need for separate camera power supplies and no additional wiring is required, enabling Plug & Play feature in the entire system.
IP Plug & Play Technology Based on PoE System
Power over Ethernet (PoE) is a standard that allows Ethernet cables to transmit data and power simultaneously using a single network cable. This enables system integrators and network installers to deploy powered devices in locations that lack electrical circuitry. In addition, PoE eliminates the expense of installing additional electrical wiring.
Key Points:
• PoE NVR simplifies the system and saves electrical wiring and installation costs.
• PoE NVR can initialize and add camera automatically, greatly savinginitialization time.
• PoE NVR can add third-party camera automatically.
IP Plug & Play Technology Based on the Same LAN System
Plug & Play key point:
• When Plug and Play is enabled, the device automatically adds cameras on the same LAN.
• For uninitialized cameras, the device automatically initializes them before adding them.
• When the camera and NVR IP address are in different network segment, the NVR can modify the camera’s IP address to the NVR’s network segment.
HDCVI System PoC Technology
For analog system, HDCVI has always been known for its Plug & Play feature. It only needs one coaxial cable to connect both the camera and XVR devices and display videos of the monitored scene. Users do not need to manually configure the network settings. The XVR can automatically recognize the camera‘s signal format for adaptive switching and displaying of video footages.
To further simplify the installation of HDCVI surveillance system, we released the HDCVI PoC (Power over Coax) system.
Key Point：
• Both video, audio, control signal and electrical power can be transmitted over one single coaxial cable.
• Eliminates the need for separate camera power supplies and no additional wiring is required, enabling Plug & Play feature in the entire system.
IP Plug & Play Technology Based on PoE System
Power over Ethernet (PoE) is a standard that allows Ethernet cables to transmit data and power simultaneously using a single network cable. This enables system integrators and network installers to deploy powered devices in locations that lack electrical circuitry. In addition, PoE eliminates the expense of installing additional electrical wiring.
Key Points:
• PoE NVR simplifies the system and saves electrical wiring and installation costs.
• PoE NVR can initialize and add camera automatically, greatly savinginitialization time.
• PoE NVR can add third-party camera automatically.
IP Plug & Play Technology Based on the Same LAN System
Plug & Play key point:
• When Plug and Play is enabled, the device automatically adds cameras on the same LAN.
• For uninitialized cameras, the device automatically initializes them before adding them.
• When the camera and NVR IP address are in different network segment, the NVR can modify the camera’s IP address to the NVR’s network segment.
Solution and product
- HDCVI System
- IP System
Highlights:
• 4 signals over 1 cable (Video, Audio, Data, Power)
• Full channel AT and AF power supply
• Up to 500m long distance image transmission
• Input Detection / Short Circuit & Overcurrent Protection / Unplugging Protection
• SMD Plus / Perimeter Protection / Face Recognition / AI Coding
Product selection:
- XVR
- Camera
Highlights:
• Power and network signals over 1 cable (PoE models)
• Automatically initializes cameras, directly showing the images without extra configuration
• Automatically search and add the IPC in Lan Network
• Loaded with abundant PoE features, including PoE enhancement mode that enables a long distance transmission of up to 200m, bridge mode that provides convenient connection option, and so on (available on PoE models)
Product selection:
- NVR
- IP Camera
Tipycal Scenarios
Retail Shop
• The NVR’s simple and quick-to-install surveillance system can reduce the expensive installation fees, while making connection more convenient
• The Plug & Play feature can help initialize the IP camera quickly and enable fast deployment of the entire system both in PoE or non-PoE NVR.
Villa
• The NVR with built-in PoE or PoE switch can power the camera directly and doesn't need
extra configurations for the camera's power cables, reducing unnecessary installation costs.
• The Plug & Play feature can help initialize the IP camera quickly and enable fast deployment of the entire system both in PoE or non-PoE NVR.
Warehouse
• The XVR supports over-coaxial audio transmission, simplifying system deployment
• The PoC technology saves cost of designing, installing, and maintaining a separate camerapower supply
Parking Lot
• HDCVI PoC solution eliminates the need for separate power supplies for cameras
• HDCVI PoC technology supports up to 500m long distance transmission for both video and power
