product-img
  • small-img

S7602 EoL-L

High-end Multiservice Routing Switches

> Supporting technologies required by cloud data centers, for example, TRILL, EVB, and FCoE
> Integrating multiple network services such as IPv6, network security, wireless control, and passive optical networks
> Providing multiple high availability technologies such as non-stop forwarding, non-stop upgrade, graceful restart, and ring network protection. This improves production efficiency of users and ensures a maximum normal operation time of the network, thereby lowering the total costs of ownership (TCOs) for customers


  • ์‚ฌ์–‘
  • ์•ก์„ธ์„œ๋ฆฌ
  • ๋‹ค์šด๋กœ๋“œ
  • Technical Speci๏ฌcation

    Model

    DH-S7602

    Switching capacity

    5.12 Tbit/s or 12.8 Tbit/s

    IPv4 packet forwarding rate

    960 Mpps/2400 Mpps

    Number of slots

    4

    Number of service slots

    2

    Redundancy design

    Redundancy of power sources and main control boards

    Layer-two features

    Supports the following Layer-two features:
    โ—IEEE 802.1P (CoS priority)
    โ—IEEE 802.1Q (VLAN)
    โ—802.1d (STP)/802.1w (RSTP)/802.1s (MSTP)
    โ—IEEE 802.1ad (QinQ), flexible QinQ, and VLAN mapping
    โ—IEEE 802.3x (full duplex flow control) and backpressure flow control (half duplex)
    โ—IEEE 802.3ad (link aggregation) and cross-board link aggregation
    โ—IEEE 802.3 (10Base-T)/802.3u (100Base-T)
    โ—IEEE 802.3z (1000BASE-X)/802.3ab (1000BaseT)
    โ—IEEE 802.3ae (10Gbase)
    โ—RRPP
    โ—Cross-board port/flow mirroring
    โ—Suppression of port broadcast/multicast/unknown unicast storms
    โ—Jumbo frames
    โ—VLAN division based on ports, protocols, subnets, and MAC addresses
    โ—SuperVLANs
    โ—PVLANs
    โ—Multicast VLAN+
    โ—Point-to-point single-VLAN cross connection and dual-VLAN cross connection
    โ—Forwarding dependent on VLAN IDs only, without MAC address learning
    โ—Maximum VLAN mapping/Full support of VLAN mapping by flexible QinQ entries
    โ—GVRP
    โ—LLDP

    IPv4 routing

    Supports the following IPv4 routing features:
    โ—ARP Proxy
    โ—DHCP Relay
    โ—DHCP Server
    โ—Static routing
    โ—RIPv1/v2
    โ—OSPFv2
    โ—IS-IS
    โ—BGPv4
    โ—OSPF/IS-IS/BGP GR (Graceful Restart)
    โ—Equivalent routing
    โ—Policy-based routing
    โ—Routing policies

    IPv6 routing

    Supports the following IPv6 routing features:
    โ—ICMPv6
    โ—ICMPv6 redirection
    โ—DHCPv6
    โ—ACLv6
    โ—OSPFv3
    โ—RIPng
    โ—BGP4+
    โ—IS-ISv6
    โ—ISATAP
    โ—6to4 tunnels
    โ—IPv6/IPv4 dual-protocol stack

    Multicast

    Supports the following multicast routing features:
    โ—IGMPv1/v2/v3
    โ—IGMPv1/v2/v3 Snooping
    โ—IGMP Filter
    โ—IGMP fast leave
    โ—PIM-SM/PIM-DM/PIM-SSM
    โ—MSDP
    โ—AnyCast-RP
    โ—MLDv2/MLDv2 Snooping
    โ—PIM-SMv6, PIM-DMv6, and PIM-SSMv6

    ACL/QoS

    Supports the following ACL/QoS features:
    โ—Standard and extended ACLs
    โ—VLAN-based ACLs
    โ—Ingress and egress ACLs
    โ—Ingress and Egress CARs (with granularities reaching 8 Kbit/s)
    โ—Two-level metering capability
    โ—VLAN-based aggregated CAR, and MAC addressโ€“based CAR
    โ—Traffic shaping
    โ—802.1P/DSCP priority marking and remarking
    โ—Hierarchical QoS (H-QoS)
    โ—Three-level queue scheduling
    โ—Queue scheduling mechanisms (SP, WRR, SP+WRR, and CBWFQ)
    โ—Congestion avoidance mechanisms (including Tail-Drop and WRED)
    โ—Mirroring

    Security mechanism

    Supports the following system management
    features:
    โ—FTP, TFTP, and Xmodem
    โ—SNMP v1/v2/v3
    โ—sFlow traffic statistics
    โ—RMON
    โ—NTP clock
    โ—NetStream traffic statistics function
    โ—Smart power source management
    โ—802.3az efficient energy-saving Ethernet
    โ—Device online status monitoring mechanism, detecting key components such as main control engines, backplanes, chips, and storage components

    Reliability

    Supports the following reliability features:
    โ—1+1 redundant backup of main control boards
    โ—1+1 redundant backup of power sources
    โ—Passive backup design
    โ—Hot swap of all boards
    โ—CPU protection
    โ—VRRP
    โ—Ethernet OAM (802.1ag)
    โ—MAC Tracert
    โ—RPR
    โ—RRPP and ERPS
    โ—Graceful Restart for OSPF/BGP/IS-IS
    โ—DLDP
    โ—VCT
    โ—Smart-Link
    โ—Hot patches

    Environment requirements

    โ—Temperature range: 0ยฐC (32ยฐF)โ€“45ยฐC (113ยฐF)
    โ—Relative humidity: 10%โ€“95% (non condensing)

    Security standards and EMC certification

    Passed CE, FCC PART 15, TUV-GS, UL-CUL, ICES003, and VCCI certification

    Power source

    DC:โ€“48 V toโ€“60V

    AC: 100 V to 290 V

    Dimensions (Width x Height x Depth) (mm)

    436 x 175 x 420

    Weight (full configuration)

    โ‰ค 27 kg