ITALF-300AD-GS
Dahua Flash Lamp
> Advanced voltage regulation technology that controls and stabilizes the voltage.
> Supplements light when the camera takes snapshots after receiving the flash signal from the camera.
> Supports RS-485 communication, upgrading through the serial port, and configuration of its settings and brightness through the client.
> Recycle time is less than 60 ms, meeting the time requirements for taking 2 snapshots consecutively.
> On-off trigger switch that facilitates testing whether the illuminator is running normally.
> Pulse width trigger that filters interference signals on the mounting pole by detecting pulse width signals that have a fixed width. This helps enhance the reliability of the illuminator.
> The brightness of the illuminator is automatically adjusted through the photosensitive detector.
> Generates statistics on the number of flashes and the number of times the device was triggered to assist you with quickly addressing signal interference issues on site.
> Blocks interference signals triggered by false detection. When the external triggering frequency is greater than the false detection limit, the illuminator will not respond to the next trigger signal until 10 s after the interference signal disappears.
> Highly durable, it is both waterproof and dustproof.
> The internal thermal dissipation design helps prevent the illuminator from overheating on account of high-frequency flashing.
Basic
Light Type
White HID flashing light
Recycle Time
≤60 ms (flashes with the camera for double shots)
Color Temperature
5800 K ± 200 K
Light Spot Coverage
4 m (13.12 ft); installation height: 6 m (19.69 ft); capture distance: 26 m (85.30 ft)
Center Illuminance
≤4000 lux
Trigger Mode
Pulse width triggering/Edge triggering
Illumination Distance
16 m–26 m (52.49 ft–85.30 ft)
Xenon
Exposure Index
64 GN
Flash Duration
180 μs–500 μs
Flash Count
Generates statistics on the number of flashes and the number of times the device was triggered.
Flash Lifespan
≥10,000,000 cycles
Wavelength
Visible light (wavelength: 350 nm–780 nm)
Function
Day/Night
Adjustable sensitivity (level: 1–6)
Remote Failure Display
Remotely displays the running status and fault status of the illuminator on the webpage of the camera (only Dahua cameras)
Brightness
Adjustable brightness (level: 1–6)
Snapshot and Illumination Synchronization
Yes
False Triggered Signal Blocking
Yes
Anti-interference
Yes
Port
I/O
1
Flash Light
1
RS-485
1
General
Power Supply
220 VAC ± 20%
Power Consumption
<65 J per flash
Operating Temperature
–40 °C to +70 °C (–40 °F to +158 °F)
Operating Humidity
10%–90% (RH), non-condensing
Protection
IP66
Product Dimensions
358.5 mm × 251.6 mm × 170.8 mm (14.11" × 9.91" × 6.72") (L × W × H)
Net Weight
4.0 kg (8.82 lb)
Gross Weight
4.5 kg (9.92 lb)
Installation
Universal joint installation
