Function

Display Screen

LCD

Flasher

Standard hardware flasher, independent on program control

Flashing Yellow

Flashing yellow during failure

Channel

3 output boards, supporting 36 channels

Types of Phases

16 parent phases and 16 overlap phases. Supports repeat running of parent phase, meeting requirements of repeat timing in a cycle and independent parameter settings

Signal Group Output

12 groups

Cycle Scheme

Up to 54 cycle schemes

Multi-period Timing

Up to 112 daily schemes, 48 pretimed periods, 30 weekly schemes, 30 daily dispatch schemes, and 30 special dispatch schemes

Pedestrian Crossing

Input and output of up to 8 pedestrian pushbuttons

Actuated Control

Up to 16-channel coils and 64-channel traffic enforcement cameras. Two detecting devices (include camera, coil, and more) can be used for detecting one lane

Signal Control Mode

Manual control, pretimed control, cableless link control, actuated control, pedestrian crossing coordination control

Manual Control

Manual control and remote control through host computer or central platform to meet on-site requirements

Change of Control Modes

Natural change between manual control and automatic control (pretimed control, actuated control, and more)

Cableless Link Control

Yes. Coordination control is realized by GPS time synchronization and setting offset

Special Mode Control

Yes

Two-intersection Control

Yes

Temporary Scheme

Supports configuring or clearing temporary schemes through platform

Waiting Area

Yes

Default Light Color

Default light colors include all red, flashing yellow, light off, and red flashing. Default light color displays when no phase is running in a scheme or no channel is configured

Special Status

Supports special status control of traffic lights, such as all red, flashing yellow, light off, and red flashing

Count down

Self-learning, pulse, and RS-485 communication countdown timers. Supports setting baud rate when using RS-485 communication countdown timer

Timing

Network Sync; GPS; NTP; Manual Time Adjustment

Hot Standby of Main Control

Yes

Phase

Separately set parameters of phase for cycle schemes and repeated phase. Each cycle scheme can be set with different phase parameters

Signal Control Duration

Adjustable

Auto Phase Timing

When adjusting a cycle, set the total cycle length, and the phases will be timed automatically according to the split (the ratio of phase time and cycle length in a cycle)

Failure Detection

Degradation mechanism in case of green conflict and light fault; independent hardware yellow flashing control; fault information upload and search

Access Control Monitoring

Supports door open/close monitoring and reporting

Network Control

Communicates with host computer or central platform through network; supports setting temporary scheme and special tasks on platform

Information Security

Identity authentication, control order verification, update verification of operation parameters, and broadcast storm protection

Parameters Configuration

Supports setting control parameters on PC client and remote server

Update

Network upgrade, USB/TF card upgrade

Lighting

Yes, supports door open/close and lighting linkage

Voltage Monitoring

Monitoring and display of input voltage, input current, and overall power consumption

Auto Maintenance

yes

Temperature and Humidity Monitoring

Reports temperature and humidity to platform

Low Voltage Downgrade

Yes

Startup Sequence

Adjustable

Port

Control Switch

1 main power switch, 1 controller switch, 1 signal light control switch, 1 flasher switch, and 1 lighting switch

Power Input

1

Network Port

3 RJ-45 10/100 Mbps Ethernet ports: 1 on the main control board, and 2 on the communication control board

RS-232

8

RS-485

4

USB

2

TF Card

2

GPS

2

Alarm Input

14 (pedestrian pushbutton input port included)

Alarm Output

10 (pedestrian pushbutton output port included)

General

Power Supply

220 VAC ± 20%, 50 Hz ± 2 Hz

Insulation

Insulation resistance ≥10 MΩ

Voltage Withstanding

1500 VAC, 50 Hz (1500 VAC, 50 Hz voltage is applied between the power electrode or other conductive circuits connected to the power electrode and easily accessible parts such as cabinets and installation casing)

Power Consumption

≤60 W (no load)

Drive Power

≤550 W

Operating Temperature

–40 °C to +80 °C (–40 °F to +176 °F)

Operating Humidity

10%–95% (RH), non-condensing

Protection

IP54

Anti-corrosion Level

Moderate Protection

Protective Features

Mains lightning protection; network lightning protection; electromagnetic immunity (no electrical failure in electromagnetic disturbance environments such as electrostatic discharge, fast electrical transient bursts, surges, and short-term voltage interruptions); waterproof (passed rain test. The signal controller works normally during and after the test, and there is no water seepage or accumulation inside the signal controller); dustproof (during and after the dust test, the signal controller works normally, and there is no large amount of dust inside the signal controller); corrosion (the signal controller works normally after the salt spraying test, and there is no serious corrosion of metal components such as the signal controller casing and internal rack); passed vibration test and steel ball impact test

Product Dimensions

450.0 mm × 300.0 mm × 1,348.2 mm (17.72" × 11.81" × 53.08") (L × W × H), without antenna cover;
450.0 mm × 300.0 mm × 1,388.5 mm (17.72" × 11.81" × 54.67") (L × W × H), with antenna cover

Packaging Dimensions

710.0 mm × 570.0 mm × 1,650.0 mm (27.95" × 22.44" × 64.96")

Net Weight

66.0 kg (145.51 lb)

Gross Weight

73.0 kg (160.94 lb)

Certifications

CE-LVD: EN 62368-1:2014+A11:2017
CE-EMC:EN IEC 61000-6-1:2019;EN IEC 61000-6-3:2021
CE-RED:EN 301 489-1 V2.2.3;EN 301 489-3 V2.3.2;EN 301 489-19 V2.2.1;EN 300220-1 V3.1.1 433MHz;EN 300220-2 V3.1.1 433MHz;EN 303413 V1.2.1 GPS;EN IEC 62311:2020

Installation

Floor-standing

Remote control

Included

RF433M Modulation Type

FSK

RF433M Frequency Range

433.05 MHz–434.79 MHz

RF433M Power Transmission

10 mw (EIRP)